Eaton Pow-R-Line SPX0361126 - Option Cards; SNMP Setup Edit Page

10-12 IM02601001E www.eaton.com
Setup on the Web Server Pages
SNMP Setup Edit Page
Option Cards
The PXM 2000 meter supports the following types of option cards:
Digital Output (Relay Contact) / Digital Input Card
•
Pulse Output (Solid State Relay Contacts) / Digital Input Card•
1mA Output Card•
20mA Output Card•
Electrical specications and installation information for each card is covered in Chapter 7.

The Relay Output/Digital Input Option Card has:
Two relay contact outputs for load switching•
Two wet/dry contact sensing digital inputs.•
Accumulators in the software which count the transitions of the • Inputs and Outputs.
A typical use of this card is to monitor the status of circuit breakers or relays.
Important: First use the  screen to set up the limits you want to
assign to an Output.
You can can use the  screen to congure up to eight limits. When
conguring this page, keep the following in mind:
Channel selects the electrical parameter through the •  dialog box.
The various electrical measurements from the meter are grouped under the categories
of Demand, Reading, and Total Harmonic Distortion (THD).