Certified Production Test Report
Switchboards
EATON CORPORATION, 11 CORPORATE CIRCLE, SUMTER, SC 29154
Dantzler
This certifies that the above is based upon recorded factory tests made at this location.
REVISION DWG SIZE G.O. DWG SHEET
1 of 1
CERTIFICATION
Production tests performed in accordance with UL 891, Section 44 and Eaton ISO 9000 certified Work
Instructions for Low Voltage Switchboard Inspection and Testing, as follows:
Dielectric: (Power Bus @ 2.5Kv, 1 Second) X
Mechanical Operation Of Devices X
Control Wiring Continuity X
Instrument And Protective Device Operation Verified X
Polarity Of Instrument Transformers X
Sequenced Per Schematics X
Minimum Voltage Close Verification X
Minimum Voltage Trip Verification X
Electrical Clearances Verified X
Date PDF Generated:12/11/2012 Page: 1 of 1