The information on this
document is created by Eaton
Corporation. It is disclosed
in confidence and it is only
to be used for the purpose in
which it is supplied.
PREPARED BY
EricSNims
DATE
04/29/13
APPROVED BY DATE
VERSION
7.9
NEG-ALT NUMBER
PX900719Y201-C001
REVISION
DWG SIZE
A
Eaton Corporation
Sumter, SC
JOB NAME
Banner Health Centers
DESIGNATION
SES
TYPE
Switchboards
DRAWING TYPE
Construction
G.O.
SPX0361126
ITEM
007
SHEET
1 OF 3
Switchboard General Information
Pow-R-Line C -Specifications
Quantity: 1
Alignment: Front Access/ Front and Rear Align
Service: 480Y/277V 3-Phase 4-Wire Minimum Interrupt Rating: 50 kA
Bus Specifications
Bus Amps: 800 Bus Bracing Rating: 65kA
Neutral Amps: 800
Bus Material: Silver Plated Copper Heat Test
Silver Pltd. Cu. .25 X 2.0 Ground Bus Bolted To Frame, (1) 350 kcmil Ground Lug
Incoming Information
Incoming Entry: Bottom Incoming Location: Left
Incoming Qty & Size: Terminals, Mechanical, Bottom, See Utility Specifications
Structure Specifications
Service Entrance
Enclosure Type: Type 3R (nonwalk-in) Flat Roof
Seismic Label (IBC/CBC Seismic Qualified)
Allow a minimum of an additional 6 in. on each end of the switchboard for bolt down brackets (Seismic Anchoring).
Refer to seismic installation data sheet 1A32007 and drawing 1A32010 for details.
Utility Specifications
800 Amps Util. Mtr. Compt. - SALT RIVER PROJECT
Utility Service Requirements Page References:
Lug Drillings Per Page: 347 CT Compartment Per Page 320
UGPS Per Page 345/346 Meter Door per Page 332
13J Meter Socket(s) LUGS
(2) PB2-750-2N
Enclosure properties
Struct # Description/Modifications
1 Bussed pulled Structure (Incoming Utility Structures)
Vertical isolating barrier
Auxiliary Bus
2 Incoming Utility Structures (Incoming Utility Section)
Horizontal isolating barrier
Groundlugs: 2
Auxiliary Bus
To Next Page
Loading...
