www.eaton.com IM02601001E 6-9
Using the PXM 2000 Series
1. Press the Enter button when Cnct is in the A window. The Cnct screen appears.
2. Press the Right button or Down button to select a conguration.
The choices are:
• 3 Element Wye ()
• 2.5 Element Wye ()
• 2 CT Delta ()
earlier in this chapter.
3. When you have made your selection, press the Menu button twice.
4. The screen appears. Press Enter to save the setting. Use buttons to select conguration
Port conguration consists of : (a three digit number), Baud Rate (9600; 19200; 38400; or 57600), and
Protocol (DNP 3.0; Modbus RTU; or Modbus ASCII).
1. Press the Enter button when POrt is in the A window.
The (address) screen appears. You can either:
• Enter the address.
• Access one of the other Port screens by pressing the Enter button: press Enter once to access the
screen (Baud Rate); press Enter twice to access the Prot screen (Protocol).
a.
Use the Down button to select the number value for a digit.
• Use the Right button to move to the next digit.
b.
Use the Right button or the Down button to select the setting you want.
c.
Press the Right button or the Down button to select the setting you want.
2. When you have nished making your selections, press the Menu button twice.
3. The
screen appears. Press Enter to save the settings.
Use buttons to enter Address Use buttons to select Baud Rate Use buttons to select Protocol
To Next Page
Loading...
