Eaton Pow-R-Line SPX0361126 - Configuring the Scroll Feature

6-6 IM02601001E www.eaton.com
Using the PXM 2000 Series

When in  mode, the meter performs a scrolling display, showing each parameter for 7 seconds, with a 1
second pause between parameters. The parameters that the meter displays are determined by the following
conditions:
• They have been selected through software. (Refer to Chapter 8 for instructions.)
• Whether your meter model is a PXM 2250, 2260, or 2270.

1. Press the Enter button when SCrl is in the A window.
The  screen appears.
2. Press either the Right or Down button if you want to access the
Scroll no screen.
To return to the  screen, press either button.
3. Press the Enter button on either the screen (to enable auto-scrolling) or the Scroll no screen
(to disable auto-scrolling).
The CT- n screen appears (this is the next Conguration mode parameter).

To exit the screen without changing scrolling options, press the Menu button.
• To return to the Main Menu screen, press the Menu button twice.
• To return to the scrolling (or non-scrolling) parameters display, press the Menu button three times.