www.eaton.com IM02601001E C-49
Modbus Register Maps
2B40 - 2B40 11073 - 11073 Digital Output States UINT16 bit-mapped -------- ----4321 One bit for each output.
Bit 4 is for output #4,
and bit 1 is for output
#1. If a bit is set the
output is closed, other-
wise it is opened.
1
2B41 - 2B41 11074 - 11074 Pulse Output Test Select UINT16 bit-mapped -------- ----4321 Writing 1 in bit N sets
Pulse Output N+1 in test
mode. Writing 0 oth-
erwise, reestablished
the output in normal
operation (only while in
privileged session).
When Reading this
reports which Pulse
Output is under test
according to the bits set
or cleared (1=under test,
0=normal).
1
2B42 - 2B42 11075 - 11075 Pulse Output Test Power UINT16 bit-mapped ddvvvvvv vvvvvvvv This register is Write-
able in privileged
session only.
Simulates constant
Power for the Pulse Out-
put under test. Format is
same as Kt settings for
Pulse Output.
"V" is raw value in Wh/
pulse from 0 to 9999.
"dd"=decimal point
position: 00=0.XXXX,
01=X.XXX, 10=XX.XX,
11= X.XXX.
1
2B43 - 2B46 11076 - 11079 Reserved
Reserved 4
2B47 - 2B47 11080 - 11080 Input 1 Accumulator, Scaled UINT16 0 to 9999 resolution is 1, 10, 100,
1000, 10000, or 100000
counts
Disabled accumulators
always read 0.
1
2B48 - 2B48 11081 - 11081 Input 2 Accumulator, Scaled UINT16 0 to 9999 1
2B49 - 2B49 11082 - 11082 Input 3 Accumulator, Scaled UINT16 0 to 9999 1
2B4A - 2B4A 11083 - 11083 Input 4 Accumulator, Scaled UINT16 0 to 9999 1
2B4B - 2B4B 11084 - 11084 Output 1 Accumulator, Scaled UINT16 0 to 9999 1
2B4C - 2B4C 11085 - 11085 Output 2 Accumulator, Scaled UINT16 0 to 9999 1
2B4D - 2B4D 11086 - 11086 Output 3 Accumulator, Scaled UINT16 0 to 9999 1
2B4E - 2B4E 11087 - 11087 Output 4 Accumulator, Scaled UINT16 0 to 9999 1
2B4F - 2B78 11088 - 11129 Reserved
Reserved 42
Block Size: 58
To Next Page
Loading...
