The information on this
document is created by Eaton
Corporation. It is disclosed
in confidence and it is only
to be used for the purpose in
which it is supplied.
PREPARED BY
JerryRPetruk
DATE
04/23/13
APPROVED BY DATE
VERSION
7.9
NEG-ALT NUMBER
PX900719Y201-C001
REVISION
DWG SIZE
A
Eaton Corporation
Sumter, SC
JOB NAME
Banner Health Centers
DESIGNATION
DP1 - CHANGE
TYPE
Switchboards
DRAWING TYPE
Final
G.O.
SPX0361126
ITEM
029
SHEET
1 OF 3
Switchboard General Information
Pow-R-Line C -Specifications
Quantity: 1
Alignment: Front Access/ Front and Rear Align
Service: 480Y/277V 3-Phase 4-Wire Minimum Interrupt Rating: 50 kA
Bus Specifications
Bus Amps: 800 Bus Bracing Rating: 65kA
Neutral Amps: 800
Bus Material: Silver Plated Copper Heat Test
Silver Pltd. Cu. .25 X 2.0 Ground Bus Bolted To Frame, (1) 350 kcmil Ground Lug
Incoming Information
Incoming Entry: Bottom Incoming Location: Left
Incoming Qty & Size: Terminals, Mechanical, Bottom, (3) #4-500 kcmil
Structure Specifications
Non Service Entrance
Enclosure Type: Type 1
Seismic Label (IBC/CBC Seismic Qualified)
Allow a minimum of an additional 6 in. on each end of the switchboard for bolt down brackets (Seismic Anchoring).
Refer to seismic installation data sheet 1A32007 and drawing 1A32010 for details.
Enclosure properties
Struct # Description/Modifications
1 Bottom incoming main lugs on 50x chassis (Incoming Main Device/MLO Section)
Groundlugs: 11
Page: 1 of 3
To Next Page
Loading...
