For more information visit: www.eatonelectrical.com RP01400001E
Renewal Parts
Page 10 Effective: February 2009
Current Cutler-Hammer
Panelboards
PRL1a Horizontally Mounted Connector Kit Assemblies
Table 7. Plug-in QUICKLAG Breaker Assemblies
Order the basic drawing number, along with the equivalent G–number that’s needed.
Note: When determining branch circuit quantity, remember:
1. QUICKLAG breakers with shunt trips require one additional circuit.
2. UL listed lighting and appliance (CTL) panelboards cannot exceed 42 electrically connected
circuits in a single enclosure.
3. When aluminum is specified, use the silver-plated groups.
4. The sum of the horizontally twin mounted breakers shall not exceed 140 amperes.
5. Order breakers separately with connector kit.
2C11642G03 2C11642G07
Breaker
Frame
Drawing
Number
Branch
Circuit
Quantity
3-Phase 1-Phase
Tin-Plated
Aluminum Connector
Silver-Plated
Copper Connector
Tin-Plated
Aluminum Connector
Silver-Plated
Copper Connector
Item Number
HQP, QPHW,
QHPX, QPGF,
QPHGF,
QPGFEP,
QPHGFEP
2C11642 12
18
30
—
—
—
G03
G11
G19
—
—
—
G07
G15
G23
42
48
54
—
—
—
G27
G35
G43
—
—
—
G31
G39
G47
72
96
—
—
G51
G59
—
—
G55
G63
To Next Page
Loading...
