Eaton PowerXL DG1 Series - Table 172. Instance 127 (Input). EIP Drive Status Length = 20 Bytes

134
DeviceNet external communication cards
POWERXL DG1 SERIES VFD MN040010EN—September 2016 www.eaton.com
Assembly instance 127
Table 172. Instance 127 (Input). EIP Drive status length = 20 bytes
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 CtrlFromNet At Zero Speed At Reference Alarm/Warning Faulted Direction Running Ready
1 NA
2
% Speed Actual (Low Byte) 
3
% Speed Actual (High Byte) 
4 ProcessDataOut1 (LowByte)
5 ProcessDataOut1 (HighByte)
6 ProcessDataOut2 (LowByte)
7 ProcessDataOut2 (HighByte)
8 ProcessDataOut3 (LowByte)
9 ProcessDataOut3 (HighByte)
10 ProcessDataOut4 (LowByte)
11 ProcessDataOut4 (HighByte)
12 ProcessDataOut5 (LowByte)
13 ProcessDataOut5 (HighByte)
14 ProcessDataOut6 (LowByte)
15 ProcessDataOut6 (HighByte)
16 ProcessDataOut7 (LowByte)
17 ProcessDataOut7 (HighByte)
18 ProcessDataOut8 (LowByte)
19 ProcessDataOut8 (HighByte)
 This is the actual value from the frequency converter. The value is between 0 and 10000. In the
application, the value is scaled in percentage of frequency area between set minimum and maximum
frequency. (0 = 0.00%–10000 = 100.00%).
ote:N See Appendix B for Process Data Value defaults.