Eaton PowerXL DG1 Series - Figure 18. Modbus TCP Unit ID

24
Modbus TCP On-Board communications
POWERXL DG1 SERIES VFD MN040010EN—September 2016 www.eaton.com
d. Setting Modbus TCP Unit ID
Figure 18. Modbus TCP unit ID
3. Make note of the changed IP Address.
4. Using PowerXL drive keypad, read “Active IP Address”
(Keypad menu. P20.3.2), “Active Subnet Mask”
(Keypad menu. P20.3.3), “Active Default Gateway”
(Keypad menu. P20.3.4) parameters to ensure that IP
address has been set to desired IP address.