EasyManua.ls Logo

Eaton PowerXL DG1 Series - Table 88. Instance 111 (Output) Length = 20 Bytes

Eaton PowerXL DG1 Series
195 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
64
EtherNet/IP On-Board communications
POWERXL DG1 SERIES VFD MN040010EN—September 2016 www.eaton.com
Assembly instance 111
Table 88. Instance 111 (Output) length = 20 bytes
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 NetRef NetCtrl FB DATAIN 2 FB DATAIN 1 FaultReset Direction Run
1 NA
2
FBSpeedReference (Low Byte)
3
FBSpeedReference (High Byte)
4 ProcessDataIn1 (LowByte)
5 ProcessDataIn1 (HighByte)
6 ProcessDataIn2 (LowByte)
7 ProcessDataIn2 (HighByte)
8 ProcessDataIn3 (LowByte)
9 ProcessDataIn3 (HighByte)
10 ProcessDataIn4 (LowByte)
11 ProcessDataIn4 (HighByte)
12 ProcessDataIn5 (LowByte)
13 ProcessDataIn5 (HighByte)
14 ProcessDataIn6 (LowByte)
15 ProcessDataIn6 (HighByte)
16 ProcessDataIn7 (LowByte)
17 ProcessDataIn7 (HighByte)
18 ProcessDataIn8 (LowByte)
19 ProcessDataIn8 (HighByte)
This is the reference1 to the frequency converter. Used normally as Speed reference. The allowed scaling
is 0 to 10000. In the application, the value is scaled in percentage of the frequency area between set
minimum and maximum frequency. (0 = 0.00%–10000 = 100.00%).

Table of Contents

Related product manuals