Eaton PowerXL DG1 Series - Table 183. Motor Data Object, Class 0 X28

142
DeviceNet external communication cards
POWERXL DG1 SERIES VFD MN040010EN—September 2016 www.eaton.com
Motor data object, class 0x28
Table 183. Motor data object, class 0x28
Object descriptions
Class attributes
ID Description NV Data type Access rule Remarks/Default
1 Revision NV UINT Get 1
2 Max instance NV UINT Get 3
3 Number of instances NV UINT Get 3
Class services
ID Service
0Eh Get attribute single
Instance 1 attributes
ID Description NV Data type Access rule Default Min. Max.
03h
Motor type 
NV USINT Get Squirrel cage Induction Motor (7)
06h Rated current NV UINT Get

07h Rated voltage NV UINT Get

09h Rated frequency NV UINT Get

0Ch
Pole count 
NV UINT Get

0Fh Base speed NV UINT Get

Instance 2 attributes
ID Description NV Data type Access rule Remarks/Default
06h First rated current NV UINT Get/Set

07h First rated voltage NV UINT Get/Set

09h First rated frequency NV UINT Get/Set

0Ch First pole count NV UINT Get

0Fh First base speed NV UINT Get/Set

Instance 3 attributes
ID Description NV Data type Access rule Remarks/Default
06h Second rated current NV UINT Get/Set

07h Second rated voltage NV UINT Get/Set

09h Second rated frequency NV UINT Get/Set

0Ch Second pole count NV UINT Get

0Fh Second base speed NV UINT Get/Set

Instance services
ID Service
0Eh Get_attribute_single
10h Set_attribute_single
Notes
 Instance 1 Motor type and Pole count are also part of instance 2 and instance 3.
 Refer the application manual for the default values of the motor data attribute parameters.