44
EtherNet/IP On-Board communications
POWERXL DG1 SERIES VFD MN040010EN—September 2016 www.eaton.com
After selecting “PowerXL,” “New Module” window will pop-up (as shown below). Fill
in unique name and appropriate IP address for PowerXL. Press OK. The device will get
added under “Ethernet” module.
ote:N You must change the class1 connection from provided default option by using
“Change” button available on “New Module” window. This can also be done
after adding the device under Ethernet by double-clicking on it.
To Next Page
Loading...
