Eaton PowerXL DG1 Series - Page 98

75
BACnet MS/TP—On-Board communication
POWERXL DG1 SERIES VFD MN040010EN—September 2016 www.eaton.com
Property
Device
object type
Analog value
object type
Binary value
object type
Apdu_timeout

— —
Number_of_apdu_retries

— —
List_of_session_keys — — —
Time_synchronization_recipients — — —
Max_master

— —
Max_info_frames

— —
Device_address_binding

— —
Database_revision

— —
Configuration_files — — —
Last_restore_time — — —
Backup_failure_timeout — — —
Active_cov_subscriptions — — —
Max_segments_accepted — — —
Slave_proxy_enable — — —
Auto_slave_discovery — — —
Slave_address_binding — — —
Manual_slave_address_binding — — —
Profile_name

— —
Last_restart_session — — —
Time_of_device_restart — — —
Restart_notification_recipients — — —
Utc_time_synchronization_recipients — — —
Time_synchronization_interval — — —
Align_intervals — — —
Interval_offset — — —
Present_value —
 
Status_flags —
 
Event_state —
 
Out_of_service —
 
Inactive_text — —

Active_text — —

Units —

—
Password  
— —
 Password is a vendor specific property added to device object with property
identifier as 600. Default value of password is empty string; this is a
writable property with max length of 20, it always returns ***** on read.
Same password will be used for Reinitialize Device Service and
Device communication Control service.
Table 98. Supported object types and properties summery, continued