Eaton UltraShift PLUS Series User Manual

2018.12.12
© 2017 Eaton. All rights reserved
200
TRSM0940 Service Procedures | Cobra Lever Removal and Installation
Cobra Lever Removal
1. Using a Phillips screwdriver, remove the 4 screws from
the Cobra Lever Housing.
2. Disc
onnect the 8-way Cobra Lever Harness connector
and remove the Cobra Lever from the housing.
Cobra Lever Installation
1. Connect the 8-way Cobra Lever Harness connector and
place the Cobra Lever into the tower.
2. Using a Phillip
s screwdriver install the 4 screws into
the Cobra Lever Housing.

Eaton UltraShift PLUS Series Specifications

General

Brand	Eaton
Model	UltraShift PLUS Series
Category	Microphone system
Language	English