2018.12.12
© 2017 Eaton. All rights reserved
68
TRSM0940 Service Procedures | VCS/VMS Combination Cylinder Disassembly and Assembly
VCS/VMS Combination Cylinder Disassembly and Assembly
Special Instructions
Apply Eaton® Lubricant or equivalent to Shift Cylinder
Assembly and insert valve O-Rings so a film covers the
entire surface of each O-Ring.
The same Installation and
Removal procedures can be fol-
lowed for both the range and reduction valves of the Combi-
nation Cylinder Assembly
The Range and Reduction Valves may be difficult to remove
from the
Transmission Housing because of the O-rings.
Special Tools
Typical Service Tool
To Next Page
Loading...
Need help?
General
