Eaton XC-303 Series - List of Revisions; Additional Documentation

0 About this manual
0.2 List of revisions
8 Modular PLCs XControl: XC-104-…, XC-204-…, XC-303-… 01/23 MN050005EN Eaton.com
Electrical engineering and physics-related knowledge and skills, as well as
advanced familiarity with the communication interfaces and methods being
used, will be required in order to be able to commission the devices.
0.2 List of revisions
The following table lists all major changes.
0.3 Additional documentation
Please follow the safety instructions in the "Eaton Product Secure Configura-
tion Guidelines XC-104-…, XC-204-…" and "Secure Configuration Guidelines
XC-303-…" documents and observe the "EULA XC-104-…, XC-204-…" and
"EULA XC-303-…" end-user license agreements.
More information on the topic can be found
in the following manual:
• "XN300 slice modules", MN050002
• „CANopen Gateway XN-312-GW-CAN“, MN050003
• „EtherCAT Gateway XN-312-GW-EC“, MN050010
• Manufacturer documentation for XSOFT-CODESYS-3, online help for the
individual libraries
• Documentation for the CAN modules used
• PLC programming with CODESYS manual, Chapter "Online functions",
in the following instruction leaflets:
• IL050018ZU, XC-303-...
• IL050031ZU, XControl
in the following supplement, which describes how to activate the device's
USB interface:
• MZ0500017ZU
CAUTION
Installation requires qualified electrician
Publication
date
Page Keyword New Modifica-
tion
Deleted
11/17 New edition ✓
02/18 Corrections and additions ✓
01/23 XControl added to all sections ✓