14 Web Config Tool for XC-104-… and XC-204-…
14.4 Device configuration page – System configuration page
140 Modular PLCs XControl: XC-104-…, XC-204-…, XC-303-… 01/23 MN050005EN Eaton.com
14.4.1 Device information
"Device information" will show information regarding the device and the
image currently being run. In addition, you can change the password for the
web configuration by clicking on the "Change password" button.
Figure 105: Device configuration page – Device information section
14.4.2 Changing / setting up passwords
If you reset the device to its factory settings, the Web Config Tool will ask
you to create a password when you access the device. The following screen
will appear:
To Next Page
Loading...
