16 Libraries, function blocks and functions
16.1 Using libraries
Modular PLCs XControl: XC-104-…, XC-204-…, XC-303-… 01/23 MN050005EN Eaton.com 153
16.1 Using libraries
When creating a standard project, libraries with frequently used functions
will be automatically added to the project.
This includes, for example, the Standard.lib library with known function
blocks such as: counter, timer, trigger function blocks, etc.
Additional libraries that are added automatically include the IoStandard-Lib
and 3SLicense-Lib libraries.
When you open a project, the following libraries will be copied to the library
manager.
• 3SLicense (system library)
• Standard.lib
• IoStandard
• BreakPointLogging
If the application requires additional libraries, you will need to install them
manually in the library manager.
When the project is saved, these libraries will be assigned to the project and
will be available the next time you open the project.
16.2 Installing additional system libraries
If necessary, you can install additional libraries manually.
The following steps are required:
Figure 117: Libraries, installing manually
▶1. Make sure that the library you want to install is found on a folder on your
PC.
▶2. In the configuration tree, double-click on "Library manager."
Click
on
the
"Add library" menu option.
To Next Page
Loading...
