0 About this manual
0.4 Legal disclaimer
Modular PLCs XControl: XC-104-…, XC-204-…, XC-303-… 01/23 MN050005EN Eaton.com 9
0.4 Legal disclaimer
All the information in this manual has been prepared to the best of our knowl-
edge and in accordance with the state of the art. However, this does not
exclude the possibility of there being errors or inaccuracies. We assume no
liability for the correctness and completeness of this information. In particu-
lar, this information does not guarantee any particular properties.
Do not use the Modular PLCs XControl: XC-104-…, XC-204-…, XC-303-…
before reading and understanding this manual.
It is assumed that the user of this document is thoroughly familiar with the
information found in the manuals for incorporating XControl modular PLCs
into automation processes.
Hazards posed by the XControl modular PLCs cannot be eliminated if the
safety instructions are not observed – especially if the XControl modular
PLCs is commissioned and maintained by unqualified personnel and/or the
XControl modular PLCs is used improperly. Eaton assumes no liability for any
damages resulting from cases such as these.
0.5 I/O system XN300
The ultra-compact XN300 modular slice card I/O system, which features a
plug-in connection system, complements Modular PLCs XControl: XC-104-
…, XC-204-…, XC-303-… with application-oriented functions that are ideal for
optimized system solutions.
There are XN300 slice modules available for power distribution and power
supply needs, as well as digital and analog I/O modules and technology mod-
ules.
￫
The documents specified in this manual, as well as the manual
you are reading right now, can also be downloaded free of
charge from the Internet in PDF format at:
Eaton.com/documentation
￫ Customer support ￫ Download Center – Documenta-
tion
Enter the document number ("MN050005", for example), "XCon-
trol" or "XC300" into the Quick Search text field.
or
on the Modular PLCs XControl: XC-104-…, XC-204-…, XC-303-
… product pages:
www.eaton.eu/xc300
To Next Page
Loading...
