14 Web Config Tool for XC-104-… and XC-204-…
14.6 Update configuration page
Modular PLCs XControl: XC-104-…, XC-204-…, XC-303-… 01/23 MN050005EN Eaton.com 145
14.6 Update configuration page
You can update the operating system and the bootloader under "Update." The
runtime system cannot be updated with the Web Config Tool. It can only be
updated with XSOFT-CODESYS-3.
You can upload a RAUC bundle in order to update the device's operating sys-
tem or the bootloader. The file will have .raucb as an extension.
You can simply drag&drop the *.raucb file you want to use.
Figure 112: No RAUC bundle selected
If you have already uploaded a RAUC bundle, the name of the bundle will be
shown here.
After selecting the package and tapping the "Update" button, it is important
for you to remain on the page until the upload is completed. You can follow
the corresponding progress on the first progress bar, as shown below.
You can follow the corresponding progress on the first progress bar, as
shown below.
￫
Do not turn off or unplug the device during the update!
To Next Page
Loading...
