14 Web Config Tool for XC-104-… and XC-204-…
14.6 Update configuration page
146 Modular PLCs XControl: XC-104-…, XC-204-…, XC-303-… 01/23 MN050005EN Eaton.com
Progress display
Once the upload has been completed, the second bar will show the installa-
tion progress.
Figure 113: Update progress bar
As soon as the update has been completed, you will need to restart the
device in order to run the new version.
▶ To do this, click on the "Restart" button shown after the update is com-
pleted.
￫
Please note that you can only apply one update after each
restart.
To Next Page
Loading...
