Eaton XC-303 Series - CPU Load Shell Commands

17 PLC shell commands
17.3 CPU load shell commands
162 Modular PLCs XControl: XC-104-…, XC-204-…, XC-303-… 01/23 MN050005EN Eaton.com
17.3 CPU load shell commands
plcload
The plcload PLC shell command provides information on the current CPU-
system load.
The "SchedGetProcessorLoad" function from the Codesys V3 CmpSchedule
library provides the processor load.
A utilization of more than 95 percent can cause a failure of the serial and
Ethernet communication and/or an impairment of the real-time response.
canload
The canload PLC shell command shows the CAN bus load.
caninfo shows the CAN buses' baud rates and states.
You can also get information regarding the CAN bus with the
CAN_GetBusLoad and CAN_GetBusState functions in the EA_CAN library.