14 Web Config Tool for XC-104-… and XC-204-…
14.3 Setting a language
138 Modular PLCs XControl: XC-104-…, XC-204-…, XC-303-… 01/23 MN050005EN Eaton.com
To navigate to a different page, you will need to click on the button on
the left in the top blue bar. Once you click on the button, a pane with all the
configuration pages will appear as shown below. You can then access any
configuration page from the pane.
Figure 102: Web Config Tool start page with configuration page pane on the left
You can close the pane with the configuration pages at any time by clicking
on the < arrow at the top right of the pane.
To log off, tap the lock button in the upper blue bar.
14.3 Setting a language
As soon as the device is ready, the top blue bar will show the language selec-
tion drop-down menu for the Web Config Tool. As of this writing, German
and English are available as languages. English will be selected by default.
Figure 103: English and German language selection options
To Next Page
Loading...
