1 Description of the Modular PLCs XControl: XC-104-…, XC-204-…, XC-303-…
1.3 Intended use
Modular PLCs XControl: XC-104-…, XC-204-…, XC-303-… 01/23 MN050005EN Eaton.com 13
￫ Section “20.2 Approvals and national approvals”, page 171
￫ Section “20.3 Technical specifications”, page 172
Modular PLCs XControl: XC-104-…, XC-204-…, XC-303-… may only be oper-
ated if they have been installed and connected by a qualified electrician. The
installation must comply with regulations for electromagnetic compatibility
(EMC).
DANGER
POSED BY AUTOMATIC STARTING
Powering up the XControl must not result in any hazards being
posed by controlled devices, e.g., motors starting unforeseeably
or voltages being unexpectedly applied.
To Next Page
Loading...
