Eaton XC-303 Series - Page 38

2 Installation
2.2 Mounting XControl
Modular PLCs XControl: XC-104-…, XC-204-…, XC-303-… 01/23 MN050005EN Eaton.com 33
Figure 16: Installation using the XControl for a system block as an example
The following figures use an XC-303-… device as an example
to show and illustrate the installation requirements. To do this, follow the
steps below:
▶ The Modular PLCs XControl: XC-104-…, XC-204-…, XC-303-… must be
the first element on the left in the system block.
B
A
B
Figure 14: XC-303-… Figure 15: XC-104-…, XC-204-…
ab c ϑ
30 mm (1.18“) 30 mm (1.18“) 100 mm (3.94“) ≦ 60°C (≦ 140 °F), A
≦ 55 °C (≦ 131 °F), B
a
b
c
b
a