2 Installation
2.3 Uninstalling and disassembly (using the XControl as an example)
Modular PLCs XControl: XC-104-…, XC-204-…, XC-303-… 01/23 MN050005EN Eaton.com 37
Figure 23: Placing the system block against the bottom edge of the DIN-rail
▶ Disengage the locking tabs between the modules by pulling on the front
cover (blue).
Figure 24: Disengaging the front cover
▶ Once the locking tabs have been disengaged, you can separate the mod-
ules from each other.
￫
The front cover's stay-put function will indicate that the locking
tabs have been disengaged.
The front cover of the Modular PLCs XControl: XC-104-…, XC-
204-…, XC-303-… is non-detachable and cannot be removed.
4
4
To Next Page
Loading...
