Serinus 44 User Manual 3.0
Manufacturer’s Statement
Thank you for selecting the Ecotech Serinus 44 Ammonia & Oxides of Nitrogen Analyser.
The Serinus series is the next generation of Ecotech designed and manufactured gas analysers. The
Serinus 44 will perform NO, NO
2
, NO
X
, NH
3
and N
X
measurements over a range of 0-20 ppm with a
lower detectable limit of 0.4 ppb.
This User Manual provides a complete product description including operating instructions,
calibration and maintenance requirements for the Serinus 44 Ammonia & Oxides of Nitrogen
Analyser. This manual is valid for the most recent version of the Serinus 44 which includes the new
Autoranging Power Supply, Main Controller PCA and Rear Panel PCA.
Reference should also be made to the relevant local standards which should be used in conjunction
with this manual. Some of these standards are listed in this manual.
If, after reading this manual you have any questions or you are still unsure or unclear on any part of
the Serinus 44 please do not hesitate to contact Ecotech or your local Ecotech distributor.
Please help the environment and recycle the pages of this manual when you have
finished using it.
Notice
The information contained in this manual is subject to change without notice. Ecotech reserves the
right to make changes to equipment construction, design, specifications and /or procedures without
notification.
Copyright © 2014. All rights reserved. Reproduction of this manual, in any form, is prohibited
without the written consent of Ecotech Pty Ltd.
CAUTION
Hazardous voltages exist within the instrument. Do not remove or modify any of
the internal components or electrical connections whilst the main power is on.
Ensure the main power lead is maintained in a safe working condition.
The instruments lid should be closed during normal operation to comply with
EMC regulations.
To Next Page
Loading...
