Ecotech Serinus 44 - 4.7.4 Real-Time Plot

Serinus 44 User Manual 3.0
Page 86
Figure 39 – Switching Analysers
Back Button
This button will enable the user to return to the selection screen, allowing connection to a different
instrument.
Options Menu
The Options Menu is accessed by the grey button in the top right corner of the screen or pressing the
Menu Button, depending on your Android device.
Refresh
Refresh the display.
Show/Hide NumPad
Show or hide the number pad.
Real Time Plot
Refer to Section 4.7.4.
Download
Refer to Section 4.7.5.
Get Parameters
Refer to Section 4.7.6.
Preferences
Refer to Section 4.7.7.
4.7.4 Real-Time Plot
Allows the user to view real-time plotting of up to four parameters at the same time. The user can
also scroll from left to right, top to bottom or zoom in and out on the plot by swiping/pinching.
Once the plot is zoomed or scrolled, it enters into Observer Mode, meaning that auto-scaling is
suspended. Press at the top of the screen (where it says Observer Mode) to return to Normal Mode.