CE Mark Declaration of Conformity
This declaration applies to the Serinus 44 Ammonia & Oxides of Nitrogen Analyser as manufactured
by Ecotech Pty Ltd of 1492 Ferntree Gully Rd, Knoxfield, VIC, Australia 3180. The instrument to which
this declaration relates is in conformity with the following European Union Directives:
Council Directive of 15 December 2004 on the approximation of the laws of Member States
relating to electromagnetic compatibility (2004/108/EC)
The following standard was applied:
EN 61326-1:2013 Electrical equipment for measurement, control and laboratory use – EMC
requirements – Part 1: General requirements
Immunity Requirements EN 61326-1
IEC-61000-4-2 Electrostatic discharge immunity
IEC-61000-4-3 Radiated RF immunity
IEC-61000-4-4 Electrical fast transient burst immunity
IEC-61000-4-5 Surge immunity
IEC-61000-4-6 Conducted RF immunity
IEC-61000-4-11 Voltage dips and interruption immunity
Electromagnetic Compatibility EN 61326-1
CISPR-11 Radiated RF emission measurements
CISPR-11 Mains terminal RF emission measurements
IEC-61000-3-3 Mains terminal voltage fluctuation measurements
IEC-61000-3-2 Power frequency harmonic measurements
Council Directive of 12 December 2006 on the harmonisation of the laws of member states relating
to electrical equipment designed for use within certain voltage limits (2006/95/EC)
The following standard was applied:
EN 61010-1:2013 Safety requirements for electrical equipment, for measurement control and
laboratory use (3
rd
edition) – Part 1: General requirements
For protection against:
Electric shock or burn
Mechanical Hazards
Excessive temperature
Spread of fire from the equipment
Effects of fluids and fluid pressure
Effects of radiation including laser sources and sonic and ultrasonic pressure, liberated gases,
explosion and implosion.
To Next Page
Loading...
