Serinus 44 User Manual 3.0
Figure 74 – Assemble Inner Slide on Chassis
4. Install rack mount ears on the front of the instrument using two M4 x 10 screws on each side
(refer to Figure 75).
Figure 75 – Rack Mount Ears Fitted to Instrument
5. Attach the rack mount adaptors to the ends of the outer slide rails using M4 x 10 button screws,
washers and locknuts. Do not fully tighten at this stage as minor adjustments will be required to
suit the length of the rack (refer to Figure 76).
To Next Page
Loading...
