Ecotech Serinus 44 - Setup Airodis to Communicate with Serinus; Figure 16 - Port Forwarding Example; Figure 17 - LAN Network Set-Up (Airodis)

Communications
Page 69
The default port for the Serinus range of instruments is 32783. The destination address is the
instrument IP address setup in the Network Menu.
Figure 16 – Port Forwarding Example
4.3.3 Setup Airodis to Communicate with Serinus
LAN
Below is an example of Airodis setup for a LAN network. Ensure the IP address is set to the same as
on the instrument Network Menu.
Figure 17 – LAN Network Set-Up (Airodis)