Serinus 44 User Manual 3.0
3. Select - Data Log Setup –Numeric (select the parameter numbers you wish to log) or Select -
Data Log Setup –Text (select the names of the parameters you wish to log).
4.6 Using Airodis Software to Download Data
4.6.1 Connecting the Instrument to Your PC
The instrument can communicate with a PC using RS-232 (Serial), TCP/IP (Network), Bluetooth or
USB. Serial, Bluetooth and network communications do not require additional drivers. If you wish to
connect using a USB cable, the driver must first be installed.
4.6.1.1 Connecting Over USB
If you wish to connect using USB, you will need to first install the Serinus USB driver.
Power on the instrument and connect it to your PC with a USB cable. You should receive a prompt if
the driver needs to be installed. If not, open Device Manager (Under “System” in Control Panel), find
the device and select “Update Driver Software”.
Figure 21 – Installing Driver Software (Device Manager)
When prompted where to search for the driver, select “Browse my computer for driver software”.
To Next Page
Loading...
