8. Optional Extras
8.1 Rack Mount Kit (PN E020116)
The rack mount kit is necessary for installing the Serinus into a 19” rack (the Serinus is 4RU in height).
Included Items
1 Rack Slide Set H010112
4 Rack Mount Adaptors H010133
2 Rack Mount Ears H010134
4 Spacers HAR-8700
8 M6 x 20 Button Head Screws
16 M6 Washers
8 M6 Nyloc Nuts
18 M4 x 10 Button Head Screws
8 M4 Washers
8 M4 Nyloc Nuts
8 M6 Cage Nuts
Installing the Instrument
1. Remove the rubber feet from the instrument (if attached).
2. Separate the slide rail assembly by pressing the black plastic clips in the slide rails to remove the
inner section of the rail.
Figure 73 – Separate Rack Slides
3. Attach the inner slide rails to each side of the instrument using M4 x 10 button screws; three on
each side (refer to Figure 74).
To Next Page
Loading...
