Serinus 44 User Manual 3.0
6. Click Acquire Configuration. This will probe the instrument for a channel list. After a few seconds,
the channel list should be visible in the Channels tab.
Figure 29 – Station Configuration (Channel List)
Note: If there was an error connecting to the instrument, a red dot will appear next to the station
name in the station list (on the far left hand side). Hovering over the red dot will present you with an
error message (refer to Figure 29).
Figure 30 – Error Status Notification
7. Select the Data Manager tab, click download. The Download Data window will appear. Select the
appropriate time period that you wish to download and click Download.
To Next Page
Loading...
