Chapter 29
| DHCP Commands
DHCP Client
– 838 –
hex - A hexadecimal value. (Range: 1-64 characters)
Default Setting
Class identifier option enabled, with the name of the switch.
Command Mode
Interface Configuration (VLAN)
Command Usage
◆ Use this command without any keyword to restore the default setting.
◆ This command is used to identify the vendor class and configuration of the
switch to the DHCP server, which then uses this information to decide on how
to service the client or the type of information to return.
◆ The general framework for this DHCP option is set out in RFC 2132 (Option 60).
This information is used to convey configuration settings or other identification
information about a client, but the specific string to use should be supplied by
your service provider or network administrator. Options 60, 66 and 67
statements can be added to the server daemon’s configuration file.
◆ By default, DHCP option 66/67 parameters are not carried in a DHCP server
reply. To ask for a DHCP reply with option 66/67 information, the DHCP client
request sent by this switch includes a “parameter request list” asking for this
information. Besides, the client request also includes a “vendor class identifier”
set by the ip dhcp client class-id command that allows the DHCP server to
identify the device, and select the appropriate configuration file for download.
This information is included in Option 55 and 124.
◆ The server should reply with Option 66 attributes, including the TFTP server
name and boot file name.
Table 172: Options 60, 66 and 67 Statements
Option
Statement
Keyword Parameter
60 vendor-class-identifier a string indicating the vendor class identifier
66 tftp-server-name a string indicating the tftp server name
67 bootfile-name a string indicating the bootfile name
Table 173: Options 55 and 124 Statements
Option
Statement
Keyword Parameter
55 dhcp-parameter-request-list a list of parameters, separated by ','
124 vendor-class-identifier a string indicating the vendor class identifier
To Next Page
Loading...
Need help?
General