Chapter 4
| System Management Commands
Event Logging
– 150 –
Ram Logging Configuration:
History Logging in RAM : Level Debugging (7)
Console#
The following example displays settings for the trap function.
Console#show logging trap
Global Configuration:
Syslog Logging : Enabled
Remote Logging Configuration:
Status : Disabled
Facility Type : Local use 7 (23)
Level Type : Debugging messages (7)
Console#
Related Commands
show logging sendmail (154)
Table 22: show logging flash/ram - display description
Field Description
Syslog logging Shows if system logging has been enabled via the logging on
command.
History Logging in Flash The message level(s) reported based on the logging history command.
Table 23: show logging trap - display description
Field Description
Global Configuration
Syslog Logging Shows if remote logging has been enabled via the logging trap
command.
Remote Logging Configuration
Status Shows if remote logging has been enabled via the logging trap
command.
Facility Type The facility type for remote logging of syslog messages as specified in
the logging facility command.
Level Type The severity threshold for syslog messages sent to a remote server as
specified in the logging trap level command.
To Next Page
Loading...
Need help?
General