Chapter 4
| System Management Commands
System Status
– 114 –
Main Power Status : Up
Redundant Power Status : Not present
Console#
show tech-support This command displays a detailed list of system settings designed to help technical
support resolve configuration or functional problems.
Command Mode
Normal Exec, Privileged Exec
Command Usage
This command generates a long list of information including detailed system and
interface settings. It is therefore advisable to direct the output to a file using any
suitable output capture function provided with your terminal emulation program.
Example
Console#show tech-support
dir:
File Name Type Startup Modified Time Size (bytes)
------------------------------ ------- ------- ------------------- ----------
Unit 1:
Table 13: show system – display description
Parameter Description
System Description Brief description of device type.
System OID String MIB II object ID for switch’s network management subsystem.
System Up Time Length of time the management agent has been up.
System Name Name assigned to the switch system.
System Location Specifies the system location.
System Contact Administrator responsible for the system.
MAC Address MAC address assigned to this switch.
Web Server/Port Shows administrative status of web server and UDP port number.
Web Secure Server/Port Shows administrative status of secure web server and UDP port
number.
Telnet Server/Port Shows administrative status of Telnet server and TCP port number.
Jumbo Frame Shows if jumbo frames are enabled or disabled.
System Fan Shows if forced full-speed mode is enabled.
System Temperature Temperature at specified thermal detection point.
Main Power Status Displays the status of the internal power supply.
Redundant Power Status Displays the status of the redundant power supply.
(This switch does not support a redundant power supply.
To Next Page
Loading...
Need help?
General