Chapter 24
| Multicast Filtering Commands
MLD Snooping
– 677 –
ipv6 mld snooping This command enables MLD Snooping globally on the switch. Use the no form to
disable MLD Snooping.
Syntax
[no] ipv6 mld snooping
Default Setting
Disabled
Command Mode
Global Configuration
Example
The following example enables MLD Snooping:
Console(config)#ipv6 mld snooping
Console(config)#
ipv6 mld snooping
querier
This command allows the switch to act as the querier for MLDv2 snooping. Use the
no form to disable this feature.
Syntax
[no] ipv6 mld snooping querier
Default Setting
Disabled
Command Mode
Global Configuration
clear ipv6 mld snooping
statistics
Clears MLD snooping statistics PE
show ipv6 mld snooping Displays MLD Snooping configuration PE
show ipv6 mld snooping
group
Displays the learned groups PE
show ipv6 mld snooping
group source-list
Displays the learned groups and corresponding source list PE
show ipv6 mld snooping
mrouter
Displays the information of multicast router ports PE
show ipv6 mld snooping
statistics
Shows IGMP snooping protocol statistics for the specified
interface
PE
Table 136: MLD Snooping Commands (Continued)
Command Function Mode
To Next Page
Loading...
Need help?
General