Chapter 24
| Multicast Filtering Commands
MLD Snooping
– 686 –
Example
Console#clear ipv6 mld snooping statistics
Console#
show ipv6 mld
snooping
This command shows the current MLD Snooping configuration.
Syntax
show ipv6 mld snooping [vlan vlan-id]
vlan-id - VLAN ID (1-4094)
Command Mode
Privileged Exec
Command Usage
This command displays global and VLAN-specific MLD snooping configuration
settings.
Example
The following shows MLD Snooping configuration information
Console#show ipv6 mld snooping
Service Status : Disabled
Querier Status : Disabled
Robustness : 2
Query Interval : 125 sec
Query Max Response Time : 10 sec
Router Port Expiry Time : 300 sec
Immediate Leave : Disabled on all VLAN
Unknown Flood Behavior : To Router Port
MLD Snooping Version : Version 2
Console#
show ipv6 mld
snooping group
This command shows known multicast groups, member ports, and the means by
which each group was learned.
Syntax
show ipv6 mld snooping group
Command Mode
Privileged Exec
To Next Page
Loading...
Need help?
General