EasyManuals Logo

Edge-Core ECS4120-52T Reference Guide

Edge-Core ECS4120-52T
938 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #311 background imageLoading...
Page #311 background image
Chapter 9
| General Security Measures
DHCPv4 Snooping
– 311 –
ip dhcp snooping
information option
remote-id
This command sets the remote ID to the switchs IP address, MAC address, or
arbitrary string, TR-101 compliant node identifier, or removes VLAN ID from the end
of the TR101 field. Use the no form to restore the default setting.
Syntax
ip dhcp snooping information option remote-id
{ip-address [encode {ascii | hex}] |
mac-address [encode {ascii | hex}] | string string |
tr101 {node-identifier {ip | sysname} | no-vlan-field}
no ip dhcp snooping information option remote-id
[ip-address encode] |
[mac-address encode] |
[tr101 no-vlan-field]
mac-address - Inserts a MAC address in the remote ID sub-option for the
DHCP snooping agent (that is, the MAC address of the switchs CPU).
ip-address - Inserts an IP address in the remote ID sub-option for the DHCP
snooping agent (that is, the IP address of the management interface).
encode - Indicates encoding in ASCII or hexadecimal.
string - An arbitrary string inserted into the remote identifier field.
(Range: 1-32 characters)
tr101 node-identifier - The remote ID generated by the switch is based on
TR-101 syntax (R-124, Access_Node_ID).
ip - Specifies the switchs IP address as the node identifier.
sysname - Specifies the system name as the node identifier.
tr101 no-vlan-field - Do not add “:VLAN” in TR101 field for untagged
pack``ets.
Default Setting
MAC address: hexadecimal
tr101 no-vlan-field: disabled
Command Mode
Global Configuration
Command Usage
The format for TR101 option 82 is: “<IP> eth <SID>/<PORT>[:<VLAN>]”. Note that
the SID (Switch ID) is always 0. By default the PVID is added to the end of the TR101
field for untagged packets. For tagged packets, the VLAN ID is always added. Use
the ip dhcp snooping information option remote-id tr101 no-vlan-field
command to remove the VLAN ID from the end of the TR101 field for untagged
packets. Use the no form of this command to add the PVID for untagged packets at
the end of the TR101 field.

Table of Contents

Other manuals for Edge-Core ECS4120-52T

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Edge-Core ECS4120-52T and is the answer not in the manual?

Edge-Core ECS4120-52T Specifications

General IconGeneral
BrandEdge-Core
ModelECS4120-52T
CategorySwitch
LanguageEnglish

Related product manuals