STP-iXR1606 Turbomolecular Pump
MT-79E-001-D
Page 156
STORAGE AND DISPOSAL
9
9.2 Disposal
WARNING
When disposing of the STP pump, exhaust gases inside the STP pump thoroughly.
Residual gases may result in an accident when disposing of the STP pump. If the
STP pump has been used with reactive or corrosive gasses, always clean thoroughly
before disposing of it to avoid any injury. Confirm the characteristics of gas to be
used, referring to the Material Safety Data Sheet (MSDS) you obtain from the gas
supplier.
WARNING
In the unlikely event of a failure of the pump rotor, dust can be generated from the
carbon fibre reinforced components. In this event, use appropriate personal
protective equipment when handling and disposing of the pump and ensure that all
pump inlets and outlets are capped off before disposal.
Dispose of the STP pump as industrial waste in accordance with all local and national safety and
environmental standards.
Note: Edwards will not be responsible for problems during or after disposal.
To Next Page
Loading...
Need help?
General
