STP-iXR1606 Turbomolecular Pump
MT-79E-001-D
Page 10
INTRODUCTION
1
1.8 STP pump specification
External appearance, installation and unpacking method differ depending to the STP pump
specification. Refer to the followings:
Standard type
(Without anticorrosion
treatment type)
STP-iXR1606
The display unit iDT-001 is available as an optional accessory with the STP-iXR1606.
The display unit operates the STP pump, confirms the pump status and sets various settings. (refer
to Section 6.2 and the Instruction Manual of the "Display Unit iDT-001".)
Display unit iDT-001
To Next Page
Loading...
Need help?
General
