12
◆
Preparation
◼
Inserting batteries
1. Slide and open the cover in the back of the remote control.
2. Insert 2pcs of AAA batteries.
Pay attention to the polarity, which is printed inside the remote control.
3. Firmly close the cover.
⚫ Use manganese AAA batteries for the batteries.
⚫ When battery power becomes low, replace them with new batteries as soon as
possible.
⚫ If you do not use the remote control for a long time, remove the batteries from the
remote control.
◼
Operable Range of the Remote Control
If there is no obstruction between the IR receiver of the display monitor and the remote control,
the operable range of the remote control is as follows:
Distance: within 5m
Angle: within 30° up, down, left, and right
To Next Page
Loading...
Need help?
General
