49
ADVANCED
OPERATIONS
By using the pen, you can draw on the camera image or the whiteboard.
• Be sure the pen is perpendicular to the screen when clicking.
• If you click the wrong place in relation to the cursor, hold down Button 2 on the pen (for
two seconds or more), and then calibrate again.
• The Calibration mode will be canceled automatically with two short beeps if there is no
pen operation for more than 30 seconds during the calibration.
Caution
Touch the whiteboard lightly with the pen. Do not press hard on the
whiteboard.
• Holding the pen at an extreme angle may result in a failure of the whiteboard to recognize
the position of the pen. Hold the pen perpendicular to the whiteboard.
• When using the portable IWB, you can select the mode to be used from the Main menu 2.
Note
To Next Page
Loading...
