To Next Page

To Previous Page

EMC VNX VG2/VG8 Gateway Configuration Setup Guide

236

Manually Zone Switches and Configure System LUNs

EMC CONFIDENTIAL

Dual switch with

Symmetrix array

For a dual-switch configuration with a Symmetrix array (DMX, VMAX, or VMAXe),

you must use at least two dedicated array ports on different channel directors. Ensure

that you use the actual ports you cabled:

First switch:

Second switch:

Blade 2 BE 0 to Channel Director 1 Blade 3 BE 0 to Channel Director 1

Blade 4 BE 0 to Channel Director 1 Blade 5 BE 0 to Channel Director 1

Blade 6 BE 0 to Channel Director 1 Blade 7 BE 0 to Channel Director 1

Blade 8 BE 0 to Channel Director 1 Blade 9 BE 0 to Channel Director 1

Blade 2 BE 1 to Channel Director 2 Blade 3 BE 1 to Channel Director 2

Blade 4 BE 1 to Channel Director 2 Blade 5 BE 1 to Channel Director 2

Blade 6 BE 1 to Channel Director 2 Blade 7 BE 1 to Channel Director 2

Blade 8 BE 1 to Channel Director 2 Blade 9 BE 1 to Channel Director 2

Questions and Answers:

Need help?

Do you have a question about the EMC VNX VG2 and is the answer not in the manual?

EMC VNX VG2 Specifications

General