G3 Series EtherCAT
TM
Technical Manual
13-135
Subject to change without notice
www.asco.com/g3
13.
Type, “Ping, and then the IP address of the manifold, you can view the address on the graphical display. For
example, if the IP address is 192.168.3.120, “ping 192.168.3.120” would be typed. You will get a message
stating, “Reply from 192.168.3.120: bytes=32 time<1ms TTL=128”, if the manifold responds.
14. Open a web browser on the computer and type the IP address of the manifold.
Ex. http://192.168.3.120. The Aventics G3 webpage should load after several seconds.
To Next Page
Loading...
