Emerson Aventics G3 Series - Using the G3 Series EtherCATTM Web Server Functionality

G3 Series EtherCAT
TM
Technical Manual
13-136
TDG3ECM1-5EN 07/2020
Subject to change without notice
www.asco.com/g3
Using the Functionality of the G3 Series EtherCAT
TM
Web Server
This section will discuss the functionality of the built in Ethernet server. Every Aventics EtherCAT
TM
node has this
feature. Through this server you can configure the node, force I/O, check diagnostics, etc. Each Aventics’ web page
will be explained.
Home
To get to the Aventics “Home” page, open a web browser. In the URL line, type in the IP address of the manifold and
press “Enter”. The Aventics “Home” page will appear. This page shows a picture of the Aventics EtherCAT
TM
manifold.
From this page, the user can navigate the entire built-in web server.