Emerson Aventics G3 Series - Diagnostics: Monitoring Module Values and Status

G3 Series EtherCAT
TM
Technical Manual
13-139
TDG3ECM1-5EN 07/2020
Subject to change without notice
www.asco.com/g3
Diagnostics
The “Diagnostics” window allows the user to monitor different values. These values include, “MAC Address”, “Serial
Number”, “Firmware Revision”, and “Valve Diagnostic Table”. The “Valve Diagnostic Table” enables the user to check
the status of the valve side outputs.
Actual
Configuration of
modules with
part numbers
and descriptions
including
distributed
modules
Reports
module status:

= OK
! = Attention
X = Lost comm.
Selects which module details will be shown,
more than 1 can be selected simultaneously.