Emerson E300 Series - Page 272

Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
User Menu A Commissioning
Advanced
Parameters
Diagnostics Optimization CT MODBUS RTU Technical Data
272 E300 Design Guide
Issue Number: 1
The Digital I/O Source/Destination parameters provide the routing for the source and/or destination for the digital I/O.
See T24 Digital I/O 01 Source/Destination (F18).
See T24 Digital I/O 01 Source/Destination (F18).
See T24 Digital I/O 01 Source/Destination (F18).
See T24 Digital I/O 01 Source/Destination (F18).
F18 T24 Digital I/O 01 Source/Destination
Mode Open-Loop, RFC-A, RFC-S
Minimum A00 Maximum AB99
Default J48 Units
Type 16 Bit User Save Update Rate Drive reset read
Display Format Menu Param Alpha Numeric Decimal Places 3
Coding RW, DE, PT, BU
Value Text
0Off
1On
F19 T25 Digital I/O 02 Source/Destination
Mode Open-Loop, RFC-A, RFC-S
Minimum A00 Maximum AB99
Default D03 Units
Type 16 Bit User Save Update Rate Drive reset read
Display Format Menu Param Alpha Numeric Decimal Places 3
Coding RW, DE, PT, BU
F20 T26 Digital I/O 03 Source/Destination
Mode Open-Loop, RFC-A, RFC-S
Minimum A00 Maximum AB99
Default G34 Units
Type 16 Bit User Save Update Rate Drive reset read
Display Format Menu Param Alpha Numeric Decimal Places 3
Coding RW, DE, PT, BU
F21 T27 Digital Input 04 Destination
Mode Open-Loop, RFC-A, RFC-S
Minimum A00 Maximum AB99
Default B27 Units
Type 16 Bit User Save Update Rate Drive reset read
Display Format Menu Param Alpha Numeric Decimal Places 3
Coding RW, DE, PT, BU
F22 T28 Digital Input 05 Destination
Mode Open-Loop, RFC-A, RFC-S
Minimum A00 Maximum AB99
Default G39 Units
Type 16 Bit User Save Update Rate Drive reset read
Display Format Menu Param Alpha Numeric Decimal Places 3
Coding RW, DE, PT, BU